![]() Please refer to the below steps to install the micro SD card on your camera. You may power on the camera indoors for a few minutes before installing it outdoors. ![]() The camera may work in extremely cold conditions as low as -25☌ as it will produce heat when powered on.Do not install the camera in places where rain and snow may hit the lens directly.Make sure the power ports are not exposed to water or moisture or blocked by dirt or other elements.For better image quality, ifs recommended that the lens be cleaned with a soft cloth regularly.For better image quality, please make sure that the lighting condition for both the camera and the captured object is the same. Or, it may result in poor image performance. Do not place the camera in a shaded area and point it towards a well-lit area.Or, it may result in poor image performance due to the window glare from infrared LEDs, ambient lights or status lights. Do not point the camera toward a glass window.Do not face the camera toward any light sources.Stiffen the adjustment knob to lock the camera. ![]() To get the best field of view, loosen the adjustment knob on the security mount and turn the camera. Run the cable through the cable notch on the mount base. Install the mount base with screws included in the package. Drill holes in accordance with the mounting hole template. Please refer to the below steps to install the camera with the mount. Or if you want to make Reolink NVR work with the camera, its connection diagram will be like below: To make the camera work, you need to use the PoE Switch (IEEE 802.3af, 48V Active) or DC Power (DC 12V1 /2A) to power on the camera. Please take the below diagram as a reference to connect the camera to the network. To make the camera work properly and monitor the designed area, you need to connect the camera to the network, and also mount the camera with a bracket as you need.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |